Industrial Lighting for Oil, Gas, and Petrochemical Facilities in Saudi Arabia: A Technical Guide

Saudi Arabia’s oil, gas, and petrochemical sector is the backbone of the Kingdom’s economy. Facilities operated by Saudi Aramco, SABIC, Sadara, and their contractor partners require industrial lighting that meets some of the most demanding specifications in the world.

Zone Classification and Explosion Protection

Hazardous areas in oil and gas facilities are classified into zones based on the frequency and duration of explosive atmosphere presence (Zone 0, 1, 2 for gas; Zone 20, 21, 22 for dust). Lighting fixtures installed in classified zones must carry ATEX or IECEx certification appropriate to the zone classification.

Environmental Ratings for Saudi Industrial Sites

Saudi industrial sites combine extreme heat (ambient temperatures regularly exceeding 50°C), dust, humidity in coastal areas, and chemical exposure. Minimum recommended ratings: IP66 for general industrial areas, IP67 for wash-down areas, with stainless steel or GRP (glass-reinforced plastic) housings for corrosive environments.

Saudi Aramco Engineering Standards (SAES)

Projects at Saudi Aramco facilities must comply with SAES electrical and lighting standards. These are more stringent than general SASO requirements and specify additional requirements for luminaire construction, installation clearances, and documentation.

الإضاءة الصناعية لمنشآت النفط والغاز في المملكة العربية السعودية

تتطلب منشآت أرامكو السعودية وسابك ومماثلاتها إضاءةً مُعتمدة لمناطق الخطر (ATEX أو IECEx)، بتصنيف حماية IP66 على الأقل، وقادرة على تحمّل درجات حرارة تتجاوز 55 درجة مئوية. كما يجب الالتزام بمعايير أرامكو السعودية الهندسية (SAES) في مشاريع أرامكو.

Al Adwaa’s Industrial Lighting Range

Al Adwaa manufactures industrial LED luminaires for general industrial, Zone 2, and marine/offshore applications from our facilities in Saudi Arabia. Our Dammam facility specialises in high-IP industrial products for the Eastern Province’s petrochemical sector. Contact our industrial team for project-specific specifications.